View AT070TN83V2_3106204.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x the copyright belongs to innolux. any unauthorized u se is prohibited. innolux copyright 2004 all rights reserved, copying forbidden. record of revision version revise date page content pre spec. 01 2006/08/02 initial release. 02 2006/09/01 19 modify the mechanical drawing. final spec. 01 2006/11/06 1 add the power consumption and weight values. 5 add led reverse voltage& forward current. 7 add the min. & max. led forward voltage and led forward current. add note 3 modify led voltage to led forward voltage, and led current to led forward current. 15 modify note 6. 21 add package drawing 02 2007/01/18 8 modify power sequence 17 add note 4 www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x the copyright belongs to innolux. any unauthorized use is prohibited. contents 1. general specifications ............................ ................................................... ............................. 1 2. pin assignment.................................... ................................................... ................................ 2 2.1. tft lcd panel driving section.................. ................................................... ................. 2 2.2. backlight unit section.......................... ................................................... ........................ 4 3. operation specifications .......................... ................................................... ............................ 5 3.1. absolute maximum rating........................ ................................................... ................... 5 3.1.1. typical operation conditions................. ................................................... .............. 6 3.1.2. backlight driving conditions ................... ................................................... ............. 7 3.2. power sequence ................................. ................................................... ........................ 8 3.3. timing characteristics .......................... ................................................... ....................... 9 3.3.1. timing conditions ........................... ................................................... ..................... 9 3.3.2. timing diagram .............................. ................................................... ................... 11 4. optical specifications............................. ................................................... ............................ 13 5. reliability test items ........................... ................................................... ............................... 17 6. general precautions .............................. ................................................... ............................ 18 6.1. safety ........................................ ................................................... ................................ 18 6.2. handling ...................................... ................................................... .............................. 18 6.3. static electricity ............................... ................................................... .......................... 18 6.4. storage ....................................... ................................................... ............................... 18 6.5. cleaning ...................................... ................................................... .............................. 18 7. mechanical drawing ................................ ................................................... .......................... 19 8. package drawing ................................... ................................................... ........................... 20 8.1. packaging material table........................ ................................................... ................... 20 8.2. packaging quantity .............................. ................................................... ..................... 20 8.3. packaging drawing............................... ................................................... ..................... 21 www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 1/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 1. general specifications no. item specification remark 1 lcd size 7.0 inch(diagonal) 2 driver element a-si tft active matrix 3 resolution 800x3(rgb)x480 4 display mode normally white, transmissive 5 dot pitch 0.0635(w)x0.1905(h) mm 6 active area 152.4 (w)x91.44 (h) mm 7 module size 165(w)x104(h)x5.5(d) mm note 1 8 surface treatment anti-glare 9 color arrangement rgb-stripe 10 interface digital(ttl) 11 backlight power consumption 1.728w(typ.) 12 panel power consumption 0.990w(typ.) (including t-con board power consumption) 13 weight 130g(typ.) note 1: refer to mechanical drawing. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 2/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 2. pin assignment 2.1. tft lcd panel driving section fpc connector is used for the module electronics interf ace. the recommended model is fh19s -40s-0.5sh manufactured by hirose. pin no. symbol i/o function remark 1 gnd p power ground 2 gnd p power ground 3 nc - no connection 4 vcc p power supply for digital circuit 5 vcc p power supply for digital circuit 6 vcc p power supply for digital circuit 7 vcc p power supply for digital circuit 8 nc - no connection 9 de i data enable 10 gnd p power ground 11 gnd p power ground 12 gnd p power ground 13 b5 i blue data input (msb) 14 b4 i blue data input 15 b3 i blue data input 16 gnd p power ground 17 b2 i blue data input 18 b1 i blue data input 19 b0 i blue data input(lsb) www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 3/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 20 gnd p power ground 21 g5 i green data input(msb) 22 g4 i green data input 23 g3 i green data input 24 gnd p power ground 25 g2 i green data input 26 g1 i green data input 27 g0 i green data input(lsb) 28 gnd p power ground 29 r5 i red data input(msb) 30 r4 i red data input 31 r3 i red data input 32 gnd p power ground 33 r2 i red data input 34 r1 i red data input 35 r0 i red data input(lsb) 36 gnd p power ground 37 gnd p power ground 38 dclk i sample clock 39 gnd p power ground 40 gnd p power ground i: input, o: output, p: power www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 4/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 2.2. backlight unit section led light bar connector is used for the integral backli ght system. the recommended model is bhsr-02vs-1 manufactured by jst. pin no. symbol i/o function remark 1 hi p power supply for backlight unit(high voltage) pink 2 gnd p ground for backlight unit white www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 5/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 3. operation specifications 3.1. absolute maximum rating (gnd=av ss =0v, note 2) values item symbol min. max. unit remark power voltage v cc -0.3 6.0 v input signal voltage vi -0.3 6.3 v note 1 operation temperature t op -20 70 storage temperature t st -30 80 led reverse voltage vr - 1.2 v each led led forward current if - 25 ma each led note 1: dclk, de, r0~ r5, g0~ g5, b0~ b5. note 2: the absolute maximum rating values of this pr oduct are not allowed to be exceeded at any times. should a module be used with any of t he absolute maximum ratings exceeded, the characteristics of the module may not be re covered, or in an extreme case, the module may be permanently destroyed. note 3: vr conditions: zener diode 20ma. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 6/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 3.1.1. typical operation conditions (gnd=av ss =0v) values item symbol min. typ. max. unit remark power voltage v cc 3.0 3.3 3.6 v note 1 current consumption icc - 300 350 ma input logic high voltage v ih 0.7v cc - v cc v input logic low voltage v il 0 - 0.3v cc v note 2 note 1: v cc setting should match the signals output voltage (refer to note 2) of customers system board. note 2: dclk,de,r0~ r5,g0~ g5,b0~ b5. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 7/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 3.1.2. backlight driving conditions values item symbol min. typ. max. unit remark led forward voltage v l 9.3 9.9 10.5 v note2, 3 led forward current i l 18 20 22 ma note 3 led life time - 20,000 - - hr note 1 note 1: the led life time is defined as the module brightness decrease to 50% original brightness at ta=25 and i l =20ma. the led lifetime could be decreased if operating i l is larger than 20 ma. note 2: the led supply voltage is defined by the num ber of led at ta=25 and i l =20ma. in the case of 3pcs led, v l =3.3*3=9.9v note 3: the led driving condition is defined for each led module (3 led serial). led2 led8 led9 led1 i l i l i l i l v l i l *9 www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 8/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 3.2. power sequence power supply vcc data signal t 1 b/l t 2 t 3 t 1 t 1 50 msec t 2 R RR R 200 msec t 3 R RR R 200 msec note: data signal includes dclk, de, r0~ r5, g0~ g5, b0~ b5. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 9/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 3.3. timing characteristics 3.3.1. timing conditions sync mode input signal characteristics ( 800 x 480 ) values item symbol min. typ. max. unit remark clock period t clk 20.0 30.0 - ns clock frequency f clk - 33.3 50 mhz clock low level width t wcl 8 - - clock high level width t wch 8 - - clock rise/fall time t clkr, t clkf - - 3 ns hsync period t hp - 928 - t clk hsync pulse width t hw - 48 - t clk hsync back porch t hbp - 40 - t clk hsync width + back porch t hw + t hbp 88 t clk horizontal valid data width t hv 800 t clk hsync front porch t hfp t hp - t hw - t hbp - t hv t clk horizontal blank t hbk t hp - t hv t clk vsync period t vp - 525 - t hp vsync pulse width t vw - 3 - t hp vsync back porch t vbp 29 t hp vertical valid data width t w 480 t hp vertical front porch t vfp t vp - t vw - t vbp - t w t hp vertical blank t vbk t vp - t w t hp data setup time t ds 5 - - ns data hold time t dh 10 - - ns www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 10/21 the copyright belongs to innolux. any unauthorized u se is prohibited. de mode input signal characteristics ( 800 x 480 ) values item symbol min. typ. max. unit remark period t clk 20.0 30.0 - ns frequency f clk - 33.3 50 mhz low level width t wcl 6 - - high level width t wch 6 - - rise/fall time t clkr, t clkf - - 3 ns dclk duty - 0.45 0.50 0.55 - t clkl/ t clk setup time t des 5 - - hold time t deh 10 - - rise/fall time t der, t def - - 16 ns horizontal period t hp - 928 - horizontal valid t hv 800 horizontal blank t hbk t hp - t hv t clk vertical period t vp - 525 - vertical valid t w 480 de vertical blank t vbk t vp - t w t hp setup time t ds 5 - - hold time t dh 10 - - data rise/fall time t dr, t df - - 3 ns www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 11/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 3.3.2. timing diagram h s y n c d e t h b k t h w t h b p t h p t h v t h f p input vertical timing input horizontal timing www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 12/21 the copyright belongs to innolux. any unauthorized u se is prohibited. de(rgb data) t der( t dr) t def( t df) 0.7vdd 0.3vdd de and rgb input timing www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 13/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 4. optical specifications values item symbol condition min. typ. max. unit remark l =180(9 oclock) 60 70 - r =0(3 oclock) 60 70 - t =90(12 oclock) 40 50 - viewing angle (cr 10) b =270(6 oclock) 60 70 - degree note 1 t on - 10 20 msec note 3 response time t off - 15 30 msec note 3 contrast ratio cr 400 500 - - note 4 w x 0.26 0.31 0.36 - color chromaticity w y 0.28 0.33 0.38 note 2 note 5 note 6 luminance l 250 300 - note 6 luminance uniformity y u normal ==0 70 75 - % note 7 test conditions: 1. v cc =3.3v, i l *9=180ma (backlight current), the ambient temperature is 25 . 2. the test systems refer to note 2. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 14/21 the copyright belongs to innolux. any unauthorized u se is prohibited. note 1: definition of viewing angle range fig. 4-1 definition of viewing angle note 2: definition of optical measurement system . the optical characteristics should be measure d in dark room. after 30 minutes operation, the optical properties are measured at the center point of the lcd screen. (response time is measured by photo detector topcon bm-7 , other items are measured by bm-5a/field of view: 1 /height: 500mm. ) fig. 4-2 optical measurement system se tup normal line ==0 =90 12 oclock direction =270 6 oclock direction =0 =180 active area l t b r normal line ==0 photo detector =90 12 oclock direction =270 6 oclock direction =0 =180 active area 500mm lcm lcm www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 15/21 the copyright belongs to innolux. any unauthorized u se is prohibited. note 3: definition of response time the response time is defined as the lcd optical switching time interval between white state and black state. rise time (t on ) is the time between photo detector output intensity changed from 90% to 10%. and fall time (t off ) is the time between photo detector output intensity changed from 10% to 90%. fig. 4-3 definition of response time note 4: definition of contrast ratio state black" " the on lcd when measured luminance state white" " the on lcd when measured luminance (cr) ratio contrast = note 5: definition of color chromaticity (cie1931 ) color coordinates measured at center point of lcd. note 6: all input terminals lcd panel must be gr ound while measuring the center area of the panel. the led driving condition is i l =20ma of which each led module is 3 led serial. 100% 90% 10% 0% photo detector output (relative value) t on t off white (tft off) black (tft on) white (tft off) www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 16/21 the copyright belongs to innolux. any unauthorized u se is prohibited. note 7: definition of luminance uniformity active area is divided into 9 measuring areas (refer t o fig. 4-4 ).every measuring point is placed at the center of each measur ing area. max min b b (yu) uniformity luminance = l-------active area length w----- active area widt h w w/3 w/3 w/6 l/3 l/3 l/6 l fig. 4-4 definition of measuring points b max : the measured maximum luminance of all measurement po sition. b min : the measured minimum luminance of all measurement po sition. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 17/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 5. reliability test items (note3) item test conditions remark high temperature storage ta = 80 240 hrs note 1,note 4 low temperature storage ta = -30 240hrs note 1,note 4 high temperature operation ts = 70 24 0hrs note 2,note 4 low temperature operation ta =-20 240hrs note 1,note 4 operate at high temperature and humidity +40 , 90%rh max. 240 hrs note 4 thermal shock -30 /30 min ~ + 80 /30 min for a total 100 cycles, start with cold temperature and end with high temperature. note 4 vibration test frequency range:10~55hz stroke:1.5mm sweep:10hz~55hz~10hz 2 hours for each direction of x. y. z. (6 hours for total) mechanical shock 100g 6ms,x, y, z 3 times for each direction package vibration test random vibration : 0.015g*g/hz from 5-200hz, -6db/octave from 200-500hz 2 hours for each direction of x. y. z. (6 hours for total) package drop test height:60 cm 1 corner, 3 edges, 6 surfaces electro static discharge 2kv, human body mode, 100pf /1500? note 1: ta is the ambient temperature of samples. note 2: ts is the temperature of panels surface. note 3: in the standard condition, there shall b e no practical problem that may affect the display function. after the reliability test, the prod uct only guarantees operation, but doesnt guarantee all the cosmetic specification. note 4: before cosmetic and function test, the product must have enough recovery time, at least 2 hours at room temperature. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 18/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 6. general precautions 6.1. safety liquid crystal is poisonous. do not put it in your mouth . if liquid crystal touches your skin or clothes, wash it off immediately by using soap and water. 6.2. handling 1. the lcd panel is plate glass. do not subject the pane l to mechanical shock or to excessive force on its surface. 2. the polarizer attached to the display is easily da maged. please handle it carefully to avoid scratch or other damages. 3. to avoid contamination on the display surface, do no t touch the module surface with bare hands. 4. keep a space so that the lcd panels do not touch o ther components. 5. put cover board such as acrylic board on the surface of lcd panel to protect panel from damages. 6. transparent electrodes may be disconnected if you use the lcd panel under environmental conditions where the condensation of de w occurs. 7. do not leave module in direct sunlight to avoid malfunction o f the ics. 6.3. static electricity 1. be sure to ground module before turning on power or operating module. 2. do not apply voltage which exceeds the absolute maxi mum rating value. 6.4. storage 1. store the module in a dark room where must keep at 2510 and 65%rh or less. 2. do not store the module in surroundings contai ning organic solvent or corrosive gas. 3. store the module in an anti-electrostatic container or bag. 6.5. cleaning 1. do not wipe the polarizer with dry cloth. it migh t cause scratch. 2. only use a soft sloth with ipa to wipe the polarize r, other chemicals might permanent damage to the polarizer. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 19/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 7. mechanical drawing www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 20/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 8. package drawing 8.1. packaging material table no. item model (material) dimensions(mm) unit weight (kg) quantity remark 1 lcm module at070tn83 165x104x5.5 0.130 50pcs 2 partition bc corrugated paper 512349226 1.466 1 set 3 corrugated bar b corrugated paper 512x11x3 0.046 4 set 4 dust-proof bag pe 700x530 0.048 1 pcs 5 a/s bag pe 1801600.05 0.002 50 pcs 6 carton corrugated paper 530*355*255 1.100 1 pcs 7 total weight 9 . 3 98 k g 5 % 8.2. packaging quantity total lcm quantity in carton: no. of partition 2 rows x quantity per row 25 = 50 www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a070-83-tt-02 page: 21/21 the copyright belongs to innolux. any unauthorized u se is prohibited. 8.3. packaging drawing www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of AT070TN83V2

	To Download AT070TN83V2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .